Bridgelux claims ‘silicon’ LED is commercial

Bridgelux claims ‘silicon’ LED is commercial

Technology News |
By eeNews Europe

Bridgelux (Livermore, CA) was founded in 2002 and has raised about $110 million in venture capital since then.

Most epitaxial wafers for LED use sapphire or silicon carbide substrates as the starting material. But large diameter sapphire and silicon carbide substrates are costly, difficult to process, and not widely available.

The alternative is to grow gallium nitride on low-cost silicon wafers that come in 150-, 200- and 300-mm diameters. This can deliver a 75 percent improvement in cost, Bridgelux claimed.

The 135 lumen per watt performance was achieved using a single 1.5-mm diameter LED operated at 350-mA with a color correlated temperature (CCT) of 4730K. The LEDs require 2.9-V at 350-mA and less than 3.25-V at 1-A.

Bridgelux foresees optimization of the epitaxy process on 200-mm diameter silicon wafers and anticipates the delivery of its first commercially available GaN-on-Silicon products over the course of the next two to three years.

"The significantly reduced cost-structures enabled by Silicon-based LED technology will continue to deliver dramatic reductions in the up-front capital investment required for solid state lighting," said Bill Watkins, Bridgelux CEO, in a statement. "In as little as two to three years, even the most price-sensitive markets, such as commercial and office lighting, residential applications, and retrofit lamps will seamlessly and rapidly convert to solid state lighting."

For further information:

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles