Broadband amplifier family extended to create a one-box solution

Broadband amplifier family extended to create a one-box solution

New Products |
By eeNews Europe

Existing third-party amplifiers can also be integrated into the R&S BBA100 system. The modular design allows users to combine many functions into a compact EMC broadband amplifier system that is tailored to their requirements. The R&S BBA100 is well suited for EMC applications in test houses as well as in the electronics and automobile industry.

The new RF switches for the R&S BBA100 enable users to put together even more compact amplifier systems, without switching matrices or separate system controllers. The R&S BBA100 performs the functions of these external instruments and now offers RF output switches and an RF sample switch in addition to an RF input switch. The new RF output switches can be used to apply the RF signal to various loads, such as clamps or antennas.

The switches are available in 2:1 (two inputs, one output) and 1:2 (one input, two outputs) versions and can be cascaded as required. Switching takes place automatically when the RF path is selected. The new sample port switch was designed for systems with multiple frequency bands.

When a frequency band is selected, the sample port switch automatically applies the right sample signal  (forward and reflected power) to the sample ports. This makes it much easier to connect other T&M instruments such as power meters and spectrum analyzers since the user no longer has to disconnect and reconnect measuring equipment when the frequency band is changed.

It is now also possible to integrate up to two additional third-party amplifiers. The system controller of the R&S BBA100 ensures consistent operation throughout the entire system. This allows the user to easily extend an existing amplifier system step by step and still use existing amplifiers. For remote control, the amplifier system now offers a USB port as well as GPIB, Ethernet and optical Ethernet. As a result, the user has a multitude of ways to integrate the R&S BBA100 into various network topologies.

The new options include the R&S BBA-B120 2:1 or 1:2 RF output switch, R&S BBA-B142 RF sample port switch, R&S BBA-B131 external amplifier integration and R&S BBA-K102 USB remote control.

Visit Rohde & Schwarz at

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles