MENU

Communication-less microgrid method uses native controls

Communication-less microgrid method uses native controls

News |
By Rich Pell



Researchers at the National Renewable Energy Laboratory (NREL) say they have developed a microgrid approach that sidesteps the central controller – an expensive and complicated component – and its reliance on communications, and that instead uses native controls of battery, solar, and wind systems. This approach, says the organization, could make microgrids easy and low cost where they are needed most.

“NREL’s approach,” says Przemyslaw Koralewicz, NREL engineer and co-developer of the communication-less method, “makes it possible to assemble devices into a microgrid without arduous configuration, relying on just renewable energy and amateur electrical experience – perfect for recoveries in a pinch.”

The approach, says the organization, saved it when NREL experienced a surprise power outage and the laboratory had few options for recovery: no microgrid controller and no preconfigured setup – just a large battery, solar panels, and wind turbines. Other campuses – or districts, neighborhoods, and homes – could find themselves in similar circumstances, and during an outage is no time to be fumbling with complicated configurations. Like NREL, communities can now implement a resilient microgrid off the cuff, using controls that exist on essentially any energy resource.

While microgrids are an apparent answer for recovery and resilience, the costs of a controller present a barrier to communities. In 2019, the organization found that microgrid controllers have a mean cost of $155,000/megawatt, potentially putting resilient microgrids out of reach for vulnerable areas.

Besides costs, controllers introduce a tangle of communications and system settings, often opaque, proprietary, and designed to suit particular scenarios. These features can be useful for minimizing energy use and costs, but recoveries often call for a quick-and-ready option. NREL’s method prioritizes fail-safe startup, foregoing elaborate programs and communications in favor of exceedingly basic controls, while still allowing more advanced designs to be built on top.

NREL’s approach is decentralized – the devices do not exchange data or issue commands (i.e., they are “communication-less”). Instead, devices self-regulate using system frequency as the common language. In short, a battery or other power source forms the grid by supplying power at a set frequency. Other generators like solar panels and wind turbines follow the grid by watching frequency and changing their power accordingly.

The method is similar to the so-called “droop” controls that are familiar in standard fossil fuel generators, which is part of the appeal, says the organization. The NREL researchers showed that the method works with 100% renewable energy, can be scaled, and is feasible with most any energy device.

NREL’s method frees the grid frequency from a tight 60 hertz (Hz). Unbound by mechanical rotation, the microgrid frequency can take a wider range. In fact, say the researchers, that range is precisely how the devices coordinate without communicating: As frequency rises past 60 Hz, generators reduce power. At even higher frequencies, the generators reduce their power further, rebalancing the frequency around 60 Hz. The system self-stabilizes, never overcharging the batteries or underserving the loads.

The approach still requires some device programming and parameter setting, which are detailed in a report on the approach.

“NREL’s method is the very first step in a design that could become the standard for fail-safe microgrids,” says Koralewicz. “Our communication-less method could be natively configured in future devices or possibly certified for easy access by operators. With standardized adoption, microgrids of any type – military bases, hospital backups, even networked districts – could count on an unfailing foundation to their day-to-day operations.”

Outstanding questions relate to inverters, which are the power electronic devices that interface renewable energy to the grid, and particularly, how inverters can form the grid in ways that fossil-based resources traditionally have. The UNIFI (universal interoperability for grid-forming inverters) consortium is taking on the inverter challenge with the combined effort of dozens of research institutions, led by NREL.

NREL’s communication-less method is one example of a grid-forming strategy, the sort that will be needed as systems push toward higher levels of renewables. In proposing the method, says the organization, it is breaking ground into some of the trickier topics that confront organizations like UNIFI and power systems everywhere, such as how to handle grid protection and which controls should be essential on grid-forming devices.

For more, see “Unleashing the Frequency: Multi-Megawatt Demonstration of 100% Renewable Power Systems with Decentralized Communication-Less Control Scheme.”

NREL

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s