Compact intelligent drive comes with EtherCAT interface
The units are also available as closed-frame boxes equipped with retractable connectors (BX models). The iPOS4808 BX-CAT is the first BX drive with an EtherCAT interface. It offers a high-current capability of 8A continuous, 20A peak, for the control of rotary or linear brushless, DC brush, and step motors of powers up to 400 W and voltages up to 50V.
Based on the MotionChip technology, iPOS4808 BX-CAT can operate either as a standard EtherCAT drive that accepts the CAN application protocol over EtherCAT (CoE), or as an intelligent drive that can be programmed to execute complex motion profiles directly at drive level using its built-in motion controller and the high level Technosoft Motion Language (TML).
Equipped with 2 feedback connectors, the iPOS4808 BX-CAT drive can be used in dual-loop control applications where motor and load sensors can be single-ended, differential or sine/cosine encoders. Digital and linear Halls are also accepted as motor sensors.
The iPOS4808 BX-CAT drive can work with EtherCAT communication cycles down to 200 μs for all working configurations: open loop micro-stepping or closed loop control of 2 or 3-phase steppers, DC brushed motor control, sinusoidal (FOC) or trapezoidal (Hall based) control of brushless motors.
Visit Technosoft at www.technosoftmotion.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
