Connector encloses LED control electronics for street luminaires
The Lumawise Endurance S connector system consists of a standardized interface connection according Zhaga Book 18 and includes a receptacle to be mounted on the luminary and a base-and dome combination to function as enclosure for the control-electronics. With this family of components, it becomes possible to create a luminary with sockets that allows a compatible sensing and/or communication modules that can easily be removed and replaced.
Sensing and communication modules typically provide sensory inputs to the LED drivers and communicate with other luminaries in a network. The new connector receptacle uses a single integrated gasket to seal the luminary and the module with just one seal. Internal wiring is connected by well-known poke-in wire connection. An impact resistant sealing cap can be used when no module is placed. The electronics for the control system can be housed in a base and dome combination that comes in two diameters (40mm and 80mm) and for the 40mm dome 2 different heights are available, for the 80mm base even 3 different heights are available. All domes come in a transparent or a dark-smoke colour and other colours are on request. The base-and-dome combinations are IP65 and IP66 sealed and have impact rating up to IK09.
TE Connectivity – www.te.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
