Connector solution supports DMX lighting-control protocol

Connector solution supports DMX lighting-control protocol

New Products |
By eeNews Europe

Engineered specifically for LED lighting, the connector claims to be one of the only harsh environment connector solutions on the market that transmits both power and RS-485 data and is ideal for applications involving DMX lighting-control protocol.

The UTL Power + Control connector series is UL/IEC certified. The product has been chosen by many major customers and has a proven performance through several hundred thousand units installed in the USA, Europe and Asia.
SOURIAU is one of the only interconnect companies that can provide UL/IEC certified (UL 1598, IEC 60598) products for luminaires used in urban and outdoor LED lighting applications including: architectural lighting for buildings, bridges, tunnels, airports, streetlights, stadiums, entertainment sets/stages and more.

UTL Power+Control features six contacts: three for power and three for signals. Optionally, the connectors can be overmolded to provide customers with turnkey solutions featuring fully integrated harnesses for fast, safe installation.

UTL Power + Control is simple to use and safe to install. With its ergonomic locking system and push-pull touch latch, it is easy to connect even in hard-to-see and reach locations. The audible click confirms that connections are properly mated and locked. UTL Power + Control by Souriau is a connector with current breaking capacity.

UTL Power + Control is also robust. The latch system keeps it locked in place, ensuring an IP68/69K seal. Designed for use in the harshest climates, including water immersion, it withstands all weather conditions and features a shell made from a proprietary polyamide for increased UV resistance. UTL Power + Control is covered by a five-year warranty for use in outdoor conditions with UV exposure.

The connector has a durability of 1,000 mating cycles and withstands vibrations of 10 to 2,000 Hz according to IEC 60512-4. The connector can be used at temperatures of –40°C to +105°C, complies with smoke and fire standards and has a salt-spray resistance of more than 1,000 hours.

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles