The RACD100A series offers constant output currents of 1400 mA or 700 mA at voltages from 50 V up to 142 V.
The RACD150A offers constant output currents of 1400 mA, 1050 mA or 700 mA, but with voltages from 60 V up to 210 V. Both LED driver series support dimming via PWM or 1-10V signals and are fully IP67 sealed for outdoor as well as indoor applications.
With their wide input voltage range of 90 to 305 VAC, the new drivers can be used worldwide on 115 Vac, 230 Vac and 277 Vac supplies. The drivers operate with full load efficiencies of more than 93%, feature low THD (15%) and active PFC with power factors exceeding 0.98 and are fully protected against short circuit, overload and over temperature conditions.
Applications include high power area lighting as well as car parks, warehouse or security lighting. The LED drivers are UL8750 and EN61347 certified, comply with FCC and European EMC standards and come with a full 5-year warranty.
Related articles and links:
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.