DAS carrier conditioners for both in-building and outdoor applications
The DAS interfaces allow for a wide variety of configurations, starting from simple two-port combining, to multi-carrier multi-band systems with integrated low pim, high power attenuators plus variable attenuators and monitoring ports.
“DAS designers and installers need reliable DAS interfacing solutions, and they need them quickly. Not only is Microlab’s product technology leading edge, the company has also gained a reputation of being a quality leader,” states Wolfgang Damm, Product Marketing Director of the Wireless Telecom Group. “Our new manufacturing process provides this high level of quality with an unexpectedly quick return time, even if customers asked for special, customized versions of our DCC Series.
The DCC Series™ can be configured for any frequency band combination from 698 MHz to 2700 MHz, other frequencies are available upon request. Flexible architecture allows selecting anything from single band, single carrier to multi-band, multi-carrier configurations. PIM specifications at the Tx input ports are lower than -150dBc (-155 dBc typical), measured with 2 x 43 dBm signals.
Fixed attenuators of the DCC Series™ for power levels from 10 W to 10 W, and with 3, 6, 10, 15, 20 and 30 dB attenuation can be selected. Variable attenuators provide an additional attenuation range of 0 to 30 dB. Monitor ports allow for uninterrupted system monitoring and dynamic system optimization. DCC Series™ DAS Carrier Conditioners are available off the shelf or can be configured and shipped soon after the customer’s inquiry.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
