Die-cast enclosures in three interesting new shapes
The octagonal 1590TRP is 133mm across the flats and 39mm high; it will house a circular PCB up to 126mm in diameter. The two 1590STP trapezoidal units are also 39mm high; the smaller portrait format unit is 112mm long, narrowing from 79mm to 62mm, the larger landscape format one is 95mm deep and narrows from 151mm to 122mm. All three types are available in natural finish and in a smooth gloss polyester powder paint, which does not chip after machining and provides a good surface for labels and silk screening. The strong and vibrant painted colours are Black; Cobalt Blue, RAL 5013; Green, RAL 6024; Light Gray, RAL 7035; Orange, RAL 2009 and Red, RAL 3011. A lap joint seals the units to IP54, protecting against the ingress of dust and water, and the painted finish is only applied to the external surfaces, maintaining RFI integrity. All units can be supplied factory modified with machining and silk screening to the user’s specification; AutoCAD and PDF dimensioned drawings can be downloaded at www.hammondmfg.com/dwg_OctTrap.htm.
Visit Hammond Electronics at www.hammondmfg.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
