Digital downconverter targets wideband radar and SDR applications
“The Model 71641 is designed to acquire very wide bandwidth radar and communications signals so they can be efficiently delivered and processed,” said Rodger Hosking, vice president of Pentek. “An extraordinary amount of Pentek engineering went into making this DDC IP core easy to use, even at these extreme data rates,” he added. The complex DDC IP core of the 71641 is preconfigured and characterized for a turn-key, out-of-the-box solution.
Within the Virtex-6 FPGA is a powerful Pentek designed DDC IP core. The core supports single and dual channel modes, accepting data samples from the analog to digital (A/D) converter at the full 3.6 GHz rate in single-channel mode or 1.8 GHz in two-channel operation.
Each DDC has an independent 32-bit tuning frequency programmable from DC to ƒs, where ƒs is the A/D sampling frequency. In single channel mode, DDC decimation can be programmed to 8x, 16x or 32x. In dual channel mode, both channels share the same decimation rate, programmable to 4x, 8x or 16x.
The decimating filter for each DDC accepts a unique set of user-supplied 16-bit coefficients. The 80% default filters deliver an output bandwidth of 0.8*ƒs/N, where N is the decimation setting. In single channel mode the maximum output bandwidth is 360 MHz. Rejection of adjacent-band components within the 80% output bandwidth is better than 100 dB. Each DDC delivers a complex output stream consisting of 24-bit I + 24-bit Q or 16-bit I + 16-bit Q samples at a rate of ƒs/N
Pentek’s ReadyFlow Board Support package for Windows, Linux or VxWorks operating systems includes C-callable libraries, drivers and example code for easy access to all of the Model 71641 features.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
