Digital I2S outputs added to MEMS microphones
The bottom port CMM-3526D-261-I2S-TR and top port CMM-4030D-261-I2S-TR are manufactured in small, low profile packages that measure only 3.50 x 2.65 x 0.98 mm and 4.00 x 3.00 x 1.25 mm, respectively. The digital I2S interface get rid of the need for a codec. This also allows the MEMs microphones to connect directly to DSPs and MCUs in end applications. The direct connection makes the devices simple to integrate and saves on components. The digital I2S MEMS microphones are ideal for audio recording and voice capture in space-constrained designs such as smart phones, tablets, smart home devices and wearables.
The two microphones are omnidirectional and have -26 dB sensitivity ratings, operating frequencies from 100 to 10,000 Hz, and current consumption of 400 microamps (µA). The CMM-3526D-261-I2S-TR has a signal-to-noise ratio (SNR) of 64 dBA, while the CMM-4030D-261-I2S-TR offers a SNR of 59 dBA.
The microphones are designed to be reflow solder compatible, providing extra flexibility when surface mount assembly is required. Due to their tight sensitivity tolerances of ±1 dB, both I2S models are also suitable for use in array applications that are used for functions such as beam forming and noise cancellation.
The CMM-3526D-261-I2S-TR and CMM-4030D-261-I2S-TR are available immediately with prices starting at $1.59 per unit at 500 pieces through distribution.
More information
https://www.cuidevices.com/product/audio/microphones/mems-microphones/cmm-3526d-261-i2s-tr
https://www.cuidevices.com/product/audio/microphones/mems-microphones/cmm-4030d-261-i2s-tr
Related news
PICMG ratifies MicroSAM module format for smart sensors
Market decline in 2020 includes options for long-term growth
Sensirion selects site in Hungary for sensor factory
Air flow sensor for ventilators from Sensirion
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
