DIN-rail PSUs deliver up to 50% above rated power
The RECOM REDIN120 and REDIN240 power supplies, in 120W or 240W ratings, can fulfil a wide variety of applications in industrial automation, test and inspection equipment, vending systems, metering, building automation, communication or other equipment. Active power-factor correction (PFC) is built in, and all units are UL508 listed, UL60950-1/IEC60950-1 certified, and CE marked.
Slimline cases, only 33mm wide for the REDIN120 and 46mm for the REDN240, allow conventional mounting leaving plenty of rail space for other modules, or sideways mounting for a lower profile. Several modules can be connected in series to deliver higher power or provide redundancy. Universal AC inputs simplify design-in to equipment for any market worldwide, and the REDIN120 series is available with 12V, 24V or 48V output. REDIN240 modules have 24V or 48V output.
Extremely high efficiency of up to of up to 92.5% for REDIN120 and 94.3% for REDIN240 not only saves energy but also minimizes internal heating to ensure longer sustained operation and greater reliability. The units can operate from -25 to +70°C, and deliver full rated power at up to 60°C. Over-temperature, overvoltage, short-circuit, and smart overload protection are all built in. Each module has red and green LED status indicators, as well as a “power good” relay that can be used to drive a front-panel indicator or send an error signal to the PLC.
Dengrove Electronic Components – www.dengrove.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
