MENU

Dual 13-A or single 26-A DC/DC micromodule step-down regulator with integrated heat sink delivers up to 100-A

Dual 13-A or single 26-A DC/DC micromodule step-down regulator with integrated heat sink delivers up to 100-A

New Products |
By eeNews Europe



The LTM4620 is a complete DC/DC regulator system in a 15 mm x 15 mm x 4.41 mm LGA package, including inductors, power stages and all control circuits. For optimum heat dissipation, a patented top side heat sink removes heat quickly and evenly. With 200LFM air flow, 12 VIN to 1.0 VOUT and at full load of 26 A (or 13A per output), the LTM4620 internal temperature rises 60ºC above ambient. With the addition of an external heat sink to the top of the package and 200LFM air flow, the temperature rise is 40ºC.

The LTM4620 is designed to convert 5 V to 12 V inputs to high power, low voltage point-of-load system rails such as 2.5 V to as low as 0.6 V. An accurate reference and an internal remote sense amplifier guarantee ±1.5% accurate output regulation over line, load and temperature. Sensing the voltage at the load compensates for voltage drops caused by PCB trace impedance. Excellent heat dissipation, low temperature rise, scalable and high output power capability, small footprint and the low profile package of the LTM4620 enable system designers to lay out more densely populated boards. Applications include mezzanine boards such as ATCA and microTCA systems, point-of-load regulation for advanced processors, ASICs and recently introduced 28 nm FPGAs as well as high-speed SERDES.

The LTM4620 features fast short-circuit protection where a current foldback technique reduces IOUT to a minimum, preventing the µModule regulator from overheating while protecting the load as well as the upstream power supply. Once the short-circuit condition is removed, the LTM4620 resumes operation.  The two outputs of the LTM4620 operate at 180º out of phase to minimize output ripple (when outputs share current) and input ripple, resulting in the use of fewer and smaller capacitors. For a 100 A design, four LTM4620 devices accurately current share and operate at 90º out of phase.

Pricing

The LTM4620 is rated for operation from -40 to 125ºC. 1,000-piece pricing starts at $29.99 each.

More information about the LTM4620 DC/DC regulator system at www.linear.com/product/LTM4620

View video at https://video.linear.com/p4634 for a performance demonstration.

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s