Dual winding inductors focus on high current applications

Dual winding inductors focus on high current applications

New Products |
By eeNews Europe

With dual windings the package is suited to a broad range of applications including DC-DC single-ended primary-inductor converters (SEPIC), non-isolated voltage regulators, point of load modules, LED drivers and I/O filter chokes.  

The HM78D-1210 models offer inductance values from 4.7 to 470 µH in parallel configuration; 18.8 to 1880 µH in series.     

Low resistance values ensure high-efficiency designs for SEPICs, whilst the high current ratings enable designers to save space on the PCB. Maximum DC resistance ranges from 0.014 to 0.57 ohm with leads connected in parallel, 0.056 to 2.28 ohm in series. In parallel, rated current is from 1.22 to 10.6 A, with saturation currents 1.8 A to 18.0 A. Equivalent ratings in series mode are half these values.     

Housed in rugged and cost-efficient packages, the lead-free devices feature shielded construction to enhance EMI performance. Operating temperature ranges from -40 to +125°C and the inductors are supplied in tape-and-reel format for automated production.

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles