Easy to program PXI RTD simulator modules
The range supports 4, 8, 12, 16, 20 or 24 channels in one or two PXI slots with channels able to be set as short or open circuit to simulate faulty wiring to a sensor. The modules are available with resistance ranges of 40Ω to 900Ω for PT100 simulation, 200Ω to 4500Ω for PT500 simulation and 400Ω to 9000Ω for PT1000 simulation. All versions are suitable for simulating a temperature range of approximately -150°C to over +850°C for their given sensor type. The use of resistance value calls makes programming simple.
The 40-263 range provides a convenient system for verifying channel resistance using an external DMM connected to the calibration port. This system allows cascading, so one DMM can be used to verify multiple modules. Verification can also be performed while the DUT is connected to the module.
Pickering Interfaces – www.pickeringtest.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
