
Embedded computer offers high power with low footprint
Power dissipation is typically only about 2 Watts at 720 MHz, yet it has the graphics capability to smoothly deliver 720p resolution video content.
An innovative REsolution display kit is available, providing all the display-specific cables and interface electronics to handle the signal, backlight and touch screen requirements for an off-the-shelf range of TFT panels ranging from 3.5 to 7 inches. REsolution also includes a PC utility allowing fine-tuning of display resolution and other parameters to accommodate most available TFTs.
Features include 256 MB LPDDR SDRAM and 512 MB NAND Flash, both soldered on board, plus an optional NAND Flash μSD card. Video output is available through a 24 bit RGB TTL connector or a DVI port, and a 4-wire touch screen controller and audio codec interface are also provided.
Communications capability comprises a 10/100 Ethernet port, quad USB 2.0 host ports, one USB 2.0 device port, dual RS-232 and a single RS-485 port. Bluetooth, Wi-Fi and a camera Interface are also provided. The board supports Windows CE 6.0, and by special request, Linux, QNX and VxWorks.
The versatile expansion port can accept an optional CM1 module to add GPRS and GPS functionality for telematics and in-vehicle applications. The RE2’s extended temperature option of -40˚C to +85˚C at 600MHz, and soldered memory, enhance its suitability for such harsh environments.
Customers can also use the expansion port to add their own application-specific functions, with full technical support from Blue Chip Technology.
The RE2 is backward compatible with the earlier RE1, in line with Blue Chip Technology’s development strategy. This ensures that customers can always enjoy the latest available processing performance and functionality without incurring maintenance and upgrade problems during the life of their own equipment.
For more information, visit www.bluechiptechnology.co.uk
