Embedded IoT gateway from Mouser
These embedded Internet of Things (IoT) gateway SBCs feature a 1GbE interface for Ethernet connectivity up to 1,000 Mbps, up to 8 GBytes of RAM, multiple I/O and communication interfaces, high-definition audio, and a half-size Mini PCI Express expansion slot.
The Advantech MIO 2263 Embedded IoT gateway can be ordered with either a 2.0 GHz Intel Celeron J1900 CPU with 2 MBytes of L2 cache, or a 1.33 GHz Intel Atom E3825 CPU with 1 MByte of L2 cache. The Advantech MIO 2263 SBCs support up to 8 GBytes of DDR3L DRAM in a single 204 pin SODIMM slot, with one SATA II and one mSATA interface available for hard drive expansion. A user switch allows configuration for either one mSATA port or one mini PCIe port.
Each MIO-2263 is also equipped with an Intel Gen 7 DirectX®11.1 dual independent display that supports both VGA and a single channel 24-bit LVDS. Power on both SBCs is managed through an Advanced Configuration and Power Interface (ACPI), and runs off a single, 12 VDC power input that supports a DC power hot plug.
Advantech’s MIO-2263 Embedded IoT Gateway offers an assortment of networking, connectivity and I/O options, including two RS 232 serial ports, two USB 2.0 ports, two USB 3.0 ports, an SMBus and an 8-bit general purpose input/output (GPIO). For audio, a high-definition, Realtek ALC888S audio codec is also supported with Line-in, Line out, and Mic-in connectors.
The MIO 2263 SBCs are passive thermal solutions that can operate in 0 to 60°C (32°F to 140°F) environments, with an air flow of 0.7 m/s. Both SBCs are ideally suited for a broad array of Internet of Things (IoT) and monitoring-based applications.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
