Fast-write memory for low-cost black-box recorders simplifies design of emergency data storage

Fast-write memory for low-cost black-box recorders simplifies design of emergency data storage

New Products |
By eeNews Europe

A system using the M35B32 EEPROM is able to store a significant amount of vital information (2 Kbits) in less than one millisecond, and hence can react when the onset of a system failure or an accident is detected. In cases such as a power failure, this super-fast data storage can save the information needed to recover the system before the power supply voltage falls to an unusable level.

Major applications for this high-speed memory include games, battery powered gadgets, utility meters, smart-grid equipment, industrial systems and medical devices. Compared to alternative non-volatile memories, the M35B32 is about forty-times faster than a standard 32-Kbit EEPROM and matches the write speed of Flash. Consuming approximately one-tenth the energy of Flash, ST’s new memory allows designers to specify a voltage supply backup capacitor of one-tenth the size needed to operate the memory long enough to finish writing if system power is lost unexpectedly. This translates into savings both in cost and printed-circuit-board area. The M35B32’s EEPROM technology also has cost and quality advantages compared to high-speed FRAM technology.

The M35B32 has a 32-Kbit capacity, which is divided into two sectors for event recording and regular system EEPROM. The sector sizes are user adjustable to suit various application requirements. The large page size of 256 bytes allows a large amount of data to be written in a single page-write cycle and, when addressing the event recording sector, this information can be programmed in less than 1 ms. This enhances system performance and saves software overhead. The M35B32 is accessed via a standard SPI serial connection, and so can be used as a direct replacement for standard SPI serial memories.

The M35B32 is in production now, in SO8N, TSSOP8 and FPN 2 x 3 mm compact surface-mount packages, priced at $0.65 for 1000 pieces. Alternative pricing options are available for larger quantities. Automotive-qualified devices will be released at the beginning of 2012, and will simplify the design of equipment such as vehicle ABS.

Visit STMicroelectronics at

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles