Feature-rich 4 Channel LED Driver
The iDrive® Quad is a highly efficient (86-88%)* DMX/RDM compliant product, fully approved to CE61347-2-13, which can be deployed as a 1, 2, 3 or 4 channel driver. Two major benefits of this product are its ability to operate in common anode fixture arrangements and the fact that the channels can be bonded, allowing multiple channels to be wired together to deliver a higher forward current output and greater colour variations, including variable CCT .
Further flexibility of the iDrive® Quad’s design is the independence of each of the 4 channels of voltage and current, enabling users to drive LEDs at different currents from one channel to the next, without the loss of efficiency. Each channel can be driven from 100mA to 1000mA in 10mA steps, and up to 48V DC, catering for any type of LED fixture.
The iDrive® Quad was designed with the architectural and entertainment industries in mind, although its flexibility means it is suitable for a whole host of other applications, such as retail, hospitality and leisure.
The iDrive® is feature-rich and boasts the same attributes as the other iDrive® drivers in IST’s Generation IV range, such as the iDrive® Force 12 and the rack mounted iDrive® Force 24. The Generation IV range of drivers were the first LED drivers to offer variable voltage, variable forward current and dynamic power sharing control on every channel. Advanced features include:
Ability to update the software remotely Software programmable forward current to suit different LEDs Thousands of in-built functions and shows Variable Voltage Technology: up to 300m between driver and fixture Dynamic Power Control: x2 forward current on RGB scenes 300,000 hour rated long life solid state capacitors on LED outputs Emergency mode for safety applications Low ripple current
The iDrive® QUAD has been designed to make installation simple and to save time by using standard IEC power and RJ45 DMX/RDM connectors with a unique user interface and backlit LCD display menu system to control all functions. Remote management including set-ups and LED fixture feedback can be done via RDM to enable rapid project installation and monitoring. The patented thermal control of attached LED boards optimise the LED installation for any environment. The iDrive® QUAD can be controlled by DMX512, RDM or using the hundreds of pre-programmed settings to provide independent scenes, colour combinations and effects.
Matt Fitzpatrick at IST stated: “We wanted to offer a 4 channel solution based on our Generation IV technology and initial market testing yielded an unprecedented response, since there are so few 4 channel drivers on the market that can deliver 120W of power.
The Generation IV technology is the most flexible LED driver platform that I have seen in the LED industry for 10 years and this has been reflected in our sales of the Generation IV driver products”.