FFC/FPC connector is heat resistant to 125°C
This makes the 0.5mm pitch connector suitable for automotive use. The series can accept a tabbed FFC/FPC and inserting it into the connector is user-friendly due to the wide 110° opening range of the rotating actuator. The 2mm-high connector comes with a 0.5A current rating and up to 68 contacts. The actuator is robust and the axle is securely hooked in place from above by the tips on the end of the contacts. This forms a type of hinge to ensure it does not come off under rough operation.
Firm latches within each side of the connector, known as ‘side catchers’ are provided to guide and hold a tabbed FFC/FPC in place. In addition they provide a high FFC/FPC retention force as they prevent the FFC/FPC from being pulled out easily. A clear tactile click confirms secure lock completion providing overall high connection reliability. Furthermore, the FH52K series is designed with L-shaped metal fittings to allow visual inspection of the soldering process from the top. An enhanced board retention force of approximately 90N can be achieved.
Hirose Electric – www.hirose.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
