Field-attachable, external thread mPm DIN valve connectors in DIN Form B, C and Micro versions
Options include a bi-polar Light Emitting Diode (LED) power on indicator, LED with blocking diodes to protect against over voltage or peaks when switching off, and bi-polar LED with a voltage-dependent resistor (VDR) to protect supply and switch. The Brad mPm range of DIN valve connectors from Molex conform to Industry Standard EN 175301-803 (formerly DIN 43650). This is the standard for a series of electrical connectors that is commonly used with solenoid valves, especially those used on valves in hydraulics and pneumatics systems. The ergonomic external-nut design on the mPm DIN valve connector provides greater and consistent torque for a more uniform seal between connector and cable, and 20% greater cable-retention force over internal-nut designs for increased reliability. When mated, the Molex mPm DIN connectors achieve a sealing performance from dust and water to IP67, opening up a greater range of application opportunities in more rugged environments.
Brad mPm DIN connectors from Molex are supplied “ready-to-use” disassembled in single sets, or as bulk components, which saves customers disassembly time per part and costs. They can accommodate PG9 and PG11 cable and up to 9mm cable outer diameter and, since one size fits all, the customer can reduce its connector inventory. To further reduce labour, pre-terminated and overmoulded mPm DIN valve connectors are also available in standard lengths.
Visit Molex at www.molex.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
