Filter boosts single-pair Ethernet in industrial applications
Würth Elektronik has published a circuit layout for a filter with transformers as galvanic isolation for single pair Ethernet links in industrial applications.
The filter design has isolation of 1.5 kV/60 s and is therefore fully suitable for industrial applications, unlike previous circuits that use two 50 V capacitors as galvanic isolation. The filter design is compact as the WE-STST transmitter series has a footprint of 4.5×3.2mm and provides signal stability of up to 40m cable length for 100BASE-T1 or up to 1 000 m for 10BASE-T1.
Alongside the WE-STST transmitter, a common mode choke, the WE-CNSW current-compensated data line filter, improves the EMC behavior already at frequencies from 1MHz without negatively affecting the useful signal. A TVS diode (WE-TVS) provides ESD protection to IEC 61000-4-2 up to 8 kV.
Würth Elektronik – www.we-online.com
Related filter articles
- EVALUATING THE EXTERNAL COMPONENTS FOR A DC-DC CONVERTER
- ST TEAMS WITH WURTH ON POWER SUPPLY DESIGN TOOL
- INTEGRATED DEVICE REPLACES COMMON-MODE CHOKE
- SURFACE MOUNT FERRITE BEADS FOR AUTOMOTIVE DESIGNS
- COMMON MODE CHOKE FOR AUTOMOTIVE ONE PAIR ETHERNET
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
