MENU

Filtered appliance inlet comes with a flat plastic flange

Filtered appliance inlet comes with a flat plastic flange

New Products |
By Julien Happich



The new option expands the existing series, which features a metal flange for screw mounting. The plastic flange is modernized to eliminate the bevel around the inlet, providing an attractive flat design that nearly covers the entire surface of the metal flange of the filter case. Mounting takes place with either counter-sunk or flat-head screws. The inlet is equipped with a notch for V-Lock retaining cordsets.
The EMC filter is available in standard, medical M5 or M80 versions.

The standard filter version uses capacitors class X2 and Y2. Alternatively on request, are versions with capacitors class X1 and Y1 for enhanced surge withstand voltage protection. The series is also available in a protection class II version, without ground pin, according to IEC 61140. The integrated filter at the power input provides highly effective interference suppression, which results in optimized electromagnetic compatibility. Current ratings for the 5120 series range from 1 – 10 A (IEC) or 1 – 15 A (UL) at 250 VAC. The standard 5120 offers quick-connect terminals 6.3×0.8mm, solder terminals, wire leads or PCB terminals.

Visit Schurter AG at www.schurter.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s