First co-packaged rectifier and TVS
Vishay Intertechnology has launched a surface mount device that combines a standard rectifier and transient voltage suppressor (TVS) for a two-in-one package design.
The R3T2FPHM3 uses an oxide planar chip junction design and a common cathode circuit configuration to combine a 3 A, 600 V standard rectifier with a 200W TVS in the compact FlatPAK 5 x 6 package.
With a wide temperature range from -55 °C to +175 °C, the device released today is suitable for high reliability automotive applications, including secondary protection for sensor units, distributed airbag modules, and low power DC/DC converters in power distribution systems.
By combining two different technologies in a single package, the dual-chip package saves PCB space, simplifies layouts, and lowers overall costs in these applications. When paired in series with a standard TVS, the R3T2FPHM3 offers designers a complete > 24 V solution with a low clamping ratio.
The two-in-one device’s rectifier features a low forward voltage drop of 0.86 V to reduce power losses and improve efficiency, while its TVS offers a breakdown voltage of 27 V. The R3T2FPHM3 provides ESD capability in compliance with IEC 61000-4-2, air discharge and contact mode.
It also has an MSL moisture sensitivity level of 1, per J-STD-020, LF maximum peak of 260 °C and its molding compound features a UL 94 V-0 flammability rating. The device is RoHS-compliant and halogen-free and available in an AEC-Q101 qualified version.
Samples and production quantities of the R3T2FPHM3 are available now, with lead times of 12 weeks.
https://www.vishay.com/ppg?98398
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
