First handheld live fibre detector
Fluke has launched the first handheld tool that detects live near-infrared (850-1625nm) wavelengths used in fibre-optic communication to troubleshoot cable, port, polarity and transceiver issues.
The FiberLert is designed as an easy-to-use troubleshooting tool that allows technicians and engineers to simply test for the presence of near infra-red light without the need for complicated setup or interpretation of the measurement data. When placed in front of an active fibre optic port or patch cord, the one-handed tester emits a continuous light and optional tone. The tool is unique in the market for users to resolve the cause of the communications failure in fibre-optic networks.
“There are a lot of network engineers and technicians who need to test and troubleshoot fibre connections on an occasional basis but lack the tools and expertise to do so,” said Robert Luijten, Fluke Networks training manager and test and measurement expert. “So, they are forced to guess as to the cause of a communication issue and replace components such as transceivers and patch cords in the hope of solving the issue.”
FiberLert removes the guesswork by clearly indicating where the signal is present and where it is not. This allows users to quickly pinpoint and remedy the cause of the problem, such as a failed transceiver or failed patch cord and replace it. FiberLert supports single-mode, multimode, UPC/APC patch cords and ports and can test without contacting the port or patch cord, reducing the risk of contamination or damage.
The LightBeat feature flashes the LED, indicating a powered-on condition and good battery. A timer shuts the tester off after five minutes of inactivity to extend battery life. Rugged design includes a convenient pocket clip and is backed by a two-year warranty.
Related articles
- Next-gen wireless vibration sensors are batteryless
- Solar irradiance meter eases testing of photovoltaic systems
- Handheld sonic imager locates air leaks using sound
Other articles on eeNews Europe
- Picocom samples its RISC-V OpenRAN chip
- Top articles in November on eeNews Europe
- US solid state battery deal for European car makers
- Raspberry Pi prepares for IPO
- Europe shows 2nm, quantum technologies at IEDM
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
