Fischer Elektronik adds extruded aluminium case profiles to its range
Combination cases from Fischer Elektronik consist of two extruded aluminium profiles which are combined with each other by a tongue-and-groove system and closed by a cover panel of 2mm thickness. The new profiles KO RL 2, KO TL 2 and KO LL 2 extend the versatile use of the cases with more useful functions. The KO RL 2 profile contains a heatsink being integrated in the case contour which has got a bottom thickness of 4.5mm. This profile is particularly suitable for applications on which heat is dissipated to the environment directly over the case. The new KO LL 2 case profile brings along an integral mounting bracket which allows a vertical mounting of the cases for example to a machine back panel. The KO TL 2 profile contains a support rail holder being incorporated in the contour. With the help of a permanently pressed-in steel spring in this holder the case can be mounted on a standard mounting rail TS 35 acc. to EN 60715 uncomplicatedly. Integrated inboard guide slots 1.8mm thick at a 5.08mm pitch allow the insertion of euroboard cards 160mm wide, while smaller PCBs can also be inserted with the help of special press-fit components. As standard, the cases are available in 6 lengths (100, 120, 160, 200, 220, 234 mm) as well as four different surface finishes. Cases can be machined according to customer’s specifications, surface-treated and printed.
Fischer Elektronik – www.fischerelektronik.de
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
