Flexibilized, thermally conductive one-part epoxy resists up to 260°C
Once cured, it features solid electrical characteristics including a dielectric strength of 400 volts/mil, a volume resistivity of 2-3 x 1012 ohm-cm and a thermal conductivity of 9-10 BTU·in/ft2·hr·°F at 25°C. This system has a coefficient of thermal expansion exceeding 75 in/in x 10-6/°C at 60°C and a tensile strength of over 2,000 psi. EP36AO is a capable adhesive and coating that adheres well to both metallic and non-metallic substrates and it features long-term chemical resistance to an array of organic and inorganic chemicals. As a one component system, EP36AO doesn’t require any mixing and offers the convenience of flexible cure schedules. A typical gel time is 30 minutes at 82°C, with full cures attained in two hours at 150°C. EP36AO is supplied as a solid and has a minimum shelf life of three months but can last as long as six months in its original unopened container.
Visit Master Bond at www.masterbond.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
