The iP1837 and iP1827 devices integrate a control MOSFET, synchronous FETKY, bootstrap diode, bootstrap capacitor and internal over-current protection in a compact 7.7 mm x 7.7 mm LGA wireless package, reducing component count and shrinking PCB size by 20 percent compared to discrete solutions.
The new devices feature true differential voltage sensing for precise regulation, +/- 0.5 percent accurate reference voltage over-temperature, precision deadtime trim to maximize efficiency, and body braking to optimize transient response. Additionally, the iP1837 and iP1827 are pin compatible for 25 A and 35 A applications, offer wide input voltage range of 1.5 V to 16 V, programmable frequency up to 1.5 MHz, flexible 5 V bias or 3.3 V bias/single input, and are optimized for 12 V input operations and low output voltages.
The devices are fully protected and feature enhanced thermally compensated internal hiccup over-current protection allowing flat current limit over-temperature. Additional features include pre-bias start-up, over-voltage protection, thermal shutdown, enable pin with voltage monitoring capability, power good output, and programmable soft start.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.