Four-channel analog voltage measuring module samples to 100kHz
The four-channel analog measuring module with sensor supply combines high sampling rates of up to 100 kHz per channel with time-synchronic data acquisition and ICP-mode for piezoelectric sensors, such as acceleration / vibration and acoustic sensors. Optionally, TEDS sensor detection is supported.
The four analog inputs cover ten measuring ranges with voltage of ±0,01 V up to ±100 V. The inputs are voltage proof up to ±500 V. Each input has its own adjustable sensor supply of up to ±15 V with up to ±60 mA. Designed in a IP67-rated 106x60x62mm aluminium housing and operating from -40°C up to +105°C with a relative humidity of 5 to 95 %, the module supports channel sampling rates from 10 kHz up to 100 kHz.
The data output stream runs with maximum 100 Mbit/s on Fast Ethernet via XCPonEthernet or via CAN-2.0B bus with up to 1 Mbit/s. All measuring inputs, CAN bus, power supply and housing, are completely galvanically isolated from each other.
Visit Ipetronik at www.ipetronik.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
