FPGA mezzanine module specified to VITA 57.4
New Products
|
By
eeNews Europe
The transceivers are available in two speed grades – 10.6 Gb/s and 28.1 Gb/s per channel, both with multi-rate capability. The 10.6 Gb/s can drive 100 m over OM3 MM Fiber and 28.1 Gb/s can drive 100 m over the OM4 MM Fiber. The FMC258 FPGA mezzanine module also has an on board ultra-low jitter clock generator with two independent fractional PLL. The clocking allows synchronization to an external clock input or onboard. Six clocks are routed to the GBT’s on the FMC+ pinouts and two are routed to CLK0 and CLK1 for a total of 8 clock outputs. The module has 16 LEDs in green/yellow to allow for LNK/ACT, debugging or another user defined function.
VadaTech – www.vadatech.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
