MENU

FPGA prototyping with the Virtex UltraScale

FPGA prototyping with the Virtex UltraScale

New Products |
By Julien Happich



The proFPGA XCVU080, XCVU095, XCVU125, XCVU160 and XCV190 FPGA modules vary widely in capacity, number and performance of high speed serial transceivers and price. The very elaborate boards are optimized and trimmed to ensure best signal integrity and where designed and produced with special high-end material to achieve highest system performance. The high-speed boards together with the specific high speed connectors allow a maximum point to point speed of up to 1 Gbps single ended over the standard FPGA IOs and up to 16.375 Gbps over the high-speed transceiver IOs.
The new FPGA modules can be easily assembled on the proFPGA motherboards and mixed with the existing proFPGA FPGA modules and are fully compatible with all proFPGA accessories like interface boards and interconnection cables. The boards come with 6 extension sites, 585 free accessible user IOs and an ASIC equivalent capacity from 5.3 up to 12.7 million gates. The highlight and distinguishing feature of these FPGA modules is the availability and performance of the 64 high speed transceivers (24 x GTY and 40 x GTH transceivers) which allow to run stable with a superb performance of up to of 16.375 Gb/s data transfer rate allowing to verify and test high speed interfaces like PCIe Gen4.
Visit PRO DESIGN at https://www.profpga.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s