MENU

Fusion energy: German stellarator generates helium plasma

Fusion energy: German stellarator generates helium plasma

Technology News |
By eeNews Europe



The helium plasma – a cloud of loose, charged particles – only lasted a tenth of a second.

After more than a year of technical preparation and tests, the Wendelstein 7-X fusion system, which is the world’s largest stellarator-type fusion device of its kind, managed to produce its first helium plasma which with further developments could lead to the device being used as a power station source.

Following a construction period of nine years and more than one million assembly hours, the main construction work on the Wendelstein 7-X came to an end in April 2014. Preparation for the operation of the fusion device has been under way ever since. Scientists and technicians tested all of its components in turn; the vacuum in the vessels, the cooling system, the superconducting coils and the magnetic field they produce, the control system, and the heating devices and measuring instruments.

Last week the operating team in the control room started up the magnetic field, in which the plasma is confined so that it does not come into contact with the wall of the plasma chamber and cools down. The experiment’s computer-operated control system was then activated and fed around one milligram of helium gas into the plasma vessel, from which the air had already been evacuated. The team then switched on the microwave heating for a short 1.8-kilowatt pulse – and the first plasma could be observed by the installed cameras and measuring devices.

“We’re starting with a plasma produced from the noble gas helium. We will not change over to the actual test object, a hydrogen plasma, until next year,” explainedproject leader Thomas Klinger, Director at Max Planck Institute for Plasma Physics (IPP) and head of the Wendelstein 7-X project. “This is because it is easier to achieve the plasma state with helium. Moreover, we can clean the surface of the plasma vessel with helium plasmas.”

In the next stages of the experiment, the researchers want to extend the duration of the plasma discharges and to investigate the best method for producing and heating helium plasmas using microwaves. After a break for New Year, confinement studies will resume in January when the scientist will test, among other things, how well the helium plasma is confined in the magnetic field. With these tests, the scientists will prepare the way for the first experiments with hydrogen plasma, which is ultimately intended to be fused into helium in the fusion experiments.

The first plasma in the Wendelstein 7-X fusion device in Greifswald presents itself with a bright glow. It consisted of helium and reached a temperature of about one million degrees Celsius. © IPP


The objective of fusion research is to develop a climate- and environmentally-friendly power plant, which, like the sun, harvests energy from the fusion of atomic nuclei. As the fusion fire only ignites at temperatures in excess of 100 million degrees, the fuel – a thin hydrogen plasma – must not come into contact with cold vessel walls. Confined by magnetic fields, it floats almost entirely contact-free in the interior of a vacuum chamber. Two different designs for the magnetic cage have become established – the tokamak and the stellarator. Both types of system are being tested at the IPP. The Tokamak ASDEX Upgrade is in operation in Garching and, as of today, the Wendelstein 7-X stellarator is operational in Greifswald.

Many scientists currently believe that a tokamak – the international test reactor ITER, which is currently being constructed in Cadarache as part of a worldwide collaborative project – is the only system capable of producing an energy-supplying plasma. ITER is not scheduled to be fired up until the 2020s in a project that has already seen more than 10bn euros invested so far.

A loop for diagnostics: a technician inserts a diamagnetic coil into the plasma vessel of the Wendelstein 7-X. This instrument will measure the change in the magnetic flow, an important parameter of the magnetic field for the plasma confinement. © IPP, Dag Hathiramani

The Wendelstein 7-X, the world’s largest stellarator-type fusion device, will not produce energy. Nevertheless, it should demonstrate that stellarators are also suitable for use as power plants. Using the Wendelstein 7-X it is intended to demonstrate for the first time that a stellarator can confine a plasma as well as a tokamak. And with discharges lasting 30 minutes, the stellarator should also demonstrate its crucial advantage – the ability to operate continuously. In contrast, without the help of complicated supplementary measures, tokamaks can only operate in pulses.

The assembly of Wendelstein 7-X began in April 2005: a ring of 50 superconducting coils, which are around 3.5 metres tall, forms the core of the device. The special shapes of the coils are the result of refined optimization calculations carried out by the IPP’s ‘Stellarator Theory’ division, which spent over ten years searching for a magnetic cage that is particularly heat insulating. The coils are threaded onto a ring-shaped steel plasma vessel and encased by a steel shell. In the vacuum generated inside the shell, the coils are cooled down to superconduction temperature close to absolute zero using liquid helium. Once switched on, they consume hardly any energy. The magnetic cage they create keeps the 30 cubic metres of ultra-thin plasma – the test object – suspended inside the plasma vessel.

The investment costs of the Wendelstein 7-X total 370 million euros and were provided by the German federal and federal state governments and the EU. The components were manufactured by companies throughout Europe. Orders in excess of 70 million euros were placed with companies in the region. Numerous research facilities at home and abroad were involved in the construction of the device. As part of the Helmholtz Association of German Research Centres, the Karlsruhe Institute of Technology was responsible for the microwave plasma heating; the Forschungszentrum Jülich built measuring instruments and produced the complex connections for the superconducting magnetic coils. The installation was carried out by experts from the Polish Academy of Sciences in Krakow. The American fusion research institutes at Princeton, Oak Ridge and Los Alamos contributed equipment for the Wendelstein 7-X which included auxiliary coils and measuring instruments.


Related articles and links:

www.mpg.de

News articles:

Practical compact fusion reactor proposed by MIT

Another fusion reactor breakthrough

Cold Fusion: Still alive and kicking (But perhaps without the fusion)

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s