Future Electronics gives away CapSense evaluation kits
The CY3280-MBR3 CapSense MBR3 Evaluation Kit helps designers to evaluate the third generation of Cypress Semiconductor’s capacitive-sensing technology. It can be used to develop CapSense button designs, and to implement proximity sensing.
The CapSense MBR3 devices are register-configurable, and require no firmware development on the part of the system designer. The devices and the kit use the EZ-Click software tool to configure capacitive sensing features. The CapSense MBR3 solution also supports Cypress’s SmartSense Auto-tuning technology, which reduces design effort by eliminating manual tuning for variations in PCB, overlay, paint and manufacturing.
The kit can be used to easily evaluate the advantages of SmartSense Auto-tuning. The MBR3 ICs retain CapSense functionality in the presence of water droplets, streaming water and mist. Included in each MBR3 Evaluation Kit is a dropper for users to place water on the plastic overlays, enabling them to evaluate the water tolerance of the MBR3 device.
The kit’s board also includes a proximity loop which can detect the presence of a finger or hand up to 30cm away. The kit works as a stand-alone unit and as an Arduino-compatible shield. It can be used to add a capacitive-button user interface to Arduino projects.
To apply for the MBR3 kit, go to www.my-boardclub.com and enter the Fast Track code PRC46A.
Visit Future Electronics at www.FutureElectronics.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
