
Handheld oscilloscope supports up to 5 GS/s at 200 MHz bandwidth
With a 10,000 point record length per each of four channels, users can capture extensive signal information at high sample rates to clearly see signal details. Each channel on a THS3000 oscilloscope is isolated from the chassis ground and from each other. Further, the external USB inputs for data storage, instrument setups and PC communication are also isolated. This enables the user to safely make floating measurements for voltages up to 300 VRMS CAT III when using the included 10X probes or 1000 VRMS CAT II with optional probes. The instrument has 600 VRMS CAT III rated inputs (BNC to earth ground) for safe high voltage measurements. The 21 automated measurements enable users to make many common measurements quickly and accurately.
A built-in Fast Fourier Transform (FFT) function provides insight into to the frequency spectrum of a signal, revealing signal interference, crosstalk, or switching noise. Handheld oscilloscopes are often used to perform power measurements on motor drives, power converters/inverters and power semiconductor devices. The THS3000 series is equipped to handle these measurements when coupled with the broad selection of voltage and current probes from Tektronix. Each of the four input channels can be configured to match the probe type and attenuation ensuring correct measurements and cursor readings. For initial setup or for situations where connections points are constantly changing, the instrument offers single-button Autoset and Autorange features which can automatically set up the trigger system and adjust vertical and/or horizontal oscilloscope settings.
Visit Tektronix at www.tektronix.com
