MENU

Headset detection only takes a 6-pin 1.2×1.0x0.4mm chip

Headset detection only takes a 6-pin 1.2×1.0x0.4mm chip

New Products |
By eeNews Europe



The integration of a comparator, OR gate and N channel MOSFET into a miniature package enables the connection of a headset with microphone to be quickly and simply detected.

The AZV5001 has two detect inputs that together determine when a headset has been inserted into the equipment’s audio jack. The presence of a left audio signal drives the internal comparator output low, which when logically OR’ed with a ground connection from the jack will result in a low output from the IC, indicating the headset is properly connected. Internal pull up resistors on both detect inputs ensure that connection is not indicated when either signal is absent. When a headphone is not detected, an on-chip N-channel MOSFET is enabled, which can be used to mute the microphone input to the equipment’s audio codec. The 6-pin 1.2×1.0x0.4mm IC draws 7.5μA typical when operating from a 1.8V supply. Low voltage operation is supported down to 1.6V.

Visit Diodes Incorporated at www.diodes.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s