High fidelity, low power, integrated stereo audio amplifier
The SSM6322 features −121 dB THD + N at 1 kHz, along with very low output noise from 20 Hz to 20 kHz. The low power operation, high peak output current, and high PSRR make the SSM6322 an ideal candidate for applications that require high fidelity audio, high dynamic range, precision, and low power. This highly integrated drive solution also reduces development time while reducing board space and minimizing external components. The SSM6322 is available in a 24-lead LFCSP package; it operates over the industrial temperature of −40°C to +85°C.
As well as applications such as a high fidelity headphone driver, and in Bluetooth speakers & headphones, ADI suggests applications in mobile phones, gaming notebooks and tablets, A/V receivers, professional audio equipment, audio test equipment, and in-car infotainment systems.
Analog Devices; https://www.analog.com/en/products/audio-video/audio-amplifiers/ssm6322
next page; feature list…
Flexible architecture to interface with all digital-to-analog converters (DACs)
Accepts differential current or voltage input (provides single-ended voltage output)
High output current drive capability
Greater than 100 mA rms output current
Accurately reproduces large music transients into heavy loads (16 Ω to 32 Ω)
Excellent audio fidelity;
−121 dB total harmonic distortion plus noise (THD + N) at 1 kHz, 2 V rms output with ±5 V supply and 32 Ω load
Low output integrated noise (10 Hz to 22 kHz) of 1.8 μV rms with A-weighted filter
Supply range: ±3.3 V to ±6 V (typical)
Low power operation
Enabled: 60 mW, VCC = +5 V, VEE = −5 V
Disabled/voice select: <30 μA
Low power disable mode with high output impedance
High-Z in power-down mode eliminating voice mode switch from the high fidelity path
Greater than 87 dB power supply rejection ratio (PSRR) at 20 kHz
Adjustable input common-mode voltage with resistor-programmable reference voltage
1.45 V (typical) with no external components
Capable of two single-pole, low-pass filters in series
2.2 nF maximum input capacitor
Second filter between the GAINx and FILTx pins
Pop and click noise suppression
Signal chain integration supports small printed circuit board (PCB) area
4 mm × 4 mm LFCSP package
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
