MENU

High power density 3U 4HP pluggable PSUs offer slimline benefits

High power density 3U 4HP pluggable PSUs offer slimline benefits

New Products |
By eeNews Europe



At 4HP (0.8 inches) wide and a standard 160 mm deep, the new units are the slimmest available from any manufacturer, leaving the maximum possible space in the subrack for active system boards. The units are available with power rails that suit the requirements of many embedded computing applications. The complete VeroPower range consists of pluggable PSUs with power ratings from 20 to 150 Watt.

Output power levels of 20, 40 and 50 Watt are available. The 20 and 40 Watt versions have 94-253 VAC autoranging inputs; the 50 Watt has a 115/230 VAC switchable input. The monovolt 20 W unit has single voltage rail outputs: 5 V/4 A; 12-15 V/1.4 A or 24 V/0.8 A. Three trivolt 40 W versions provide either 5 V/4 A, +12-15 V/0.6 A and -12-15 V/0.6 A; +12-15 V/1.4 A, +12-15 V/0.6 A and -12-15 V/0.6 A or 24 V/0.8 A, +12-15 V/1.4 A and -12-15 V/0.6 A. The monovolt 50 W unit gives 5 V/10 A, 12 V/4.2 A – 15 V/3.3 A or 24 V/2.1 A. All versions use the industry standard H15 connector with the pin-out following the convention established by Vero Electronics when it first developed the pluggable PSU in 1976.

All outputs are highly stable, with worst case line and load regulation a maximum of 0.1% and ripple typically less than 20 mVpp. Short circuit, output current limitation and output overvoltage protection are provided, and a powerfail signal is available on all 5 V rails.

Visit Verotec at www.verotec.co.uk

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s