High reliability flash memory card can correct up to 24 bits per 1024 bytes
The F-200 series includes an SATA II (Spec 2.6) interface and is compatible with ATA7 and ATA8. Thanks to their reliability, comprehensive monitoring methods, optimized total cost of ownership and guaranteed long-term availability, these cards are particularly suitable for use in industry, automation, medicine and transportation as well as communication and networks.
The high level of reliability is achieved through well designed wear leveling, read disturb management and the BCH-ECC (Bose-Chaudhuri-Hocquenghem-Codes) unit, which can correct up to 24 bits per 1024 bytes using a tried-and-tested procedure. What’s more, only SLC (Single Level Cell) flash storage cells are used, which have been tested to ensure the highest level of reliability, and specially developed and optimized algorithms for flash handling.
Thanks to TRIM command support for 4 KB random write access, the F-200 series can achieve a value of up to 600 IOPS (Input/Output operations per second), which is unusually high for CFast cards. In order to eliminate problems related to unexpected storage failures, Swissbit has equipped the power fail safe F-200 series with a S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) protocol and Life Time Monitoring. The CFast cards achieve read/write speeds of up to 130MB/sec with a maximum power consumption of 0.9W. They are compatible with the CFastTM Specification 1.1 and now also support the SATA and CFastTM power save modes.
Visit Swissbit at www.swissbit.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
