High-speed gang-programmer for production-scale flash configuration
Flasher ATE supports up to 10 completely individual parallel programming channels. Each channel has its own programming circuit and memory, allowing it to be used individually, while providing maximum programming speed on every channel.
In mass production, the in-system programming process usually is tightly coupled with the testing facilities of ATE or similar devices. Flasher ATE comes with a ready to use UART communication channel, handshake lines, USB and Ethernet interfaces. Any of these can be used to control its operation. It has built-in web and FTP servers that allow updates and monitoring from a production control office. Support for programming of unique serial numbers and patch data is also included.
Flasher ATE can program any on or off chip memory. All that is required is a flash loader, which is already available for most popular devices and can be created for all others.
The company has found that, with its products being widely used in mass production, there was a requirement for a dedicated Gang Programmer with the same features and speeds: it programs any kind of target system in minimum time, whether used for 10 different targets, or 10 similar targets, or any setup in between
Segger; www.segger.com/products/production/flasher/models/gang-programmer-flasher-ate/
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
