MENU

High-speed, low-power shift registers enable cascaded connections without external components

High-speed, low-power shift registers enable cascaded connections without external components

New Products |
By eeNews Europe



The main feature of the TC74VHC9595 is an additional ‘Q8C’ output port that can be directly connected to the ‘SI’ input of the next TC74VHC9595 to enable cascaded operation without external components. Additionally, the TC74VHC9595 has an integrated Schmitt trigger on all input ports. This input allows operation with slowly changing or distorted input signals of the type that can occur on long transmission lines. The Schmitt trigger input also improves immunity against noise on signal and power supply lines.     

With integrated overvoltage protection the input side of the TC74VHC9595 can tolerate voltages up to 5.5 V even when the power supply voltage is off. Furthermore, this voltage tolerance on the input together with the wide supply voltage range from 2.0 V to 5.5 V can be used to provide level shifting between 5.0 V and 3.0 V systems.     

The new TC74VHC9595 is available in a standard 16-pin TSSOP package (TC74VHC9595FT) or in an ultra-miniature VSSOP16 format (TC74VHC9595FK) with 50 percent of the footprint of the TSSOP. Minimum output currents are rated at ±8mA, while a maximum propagation delay time of 9.3 ns ensures high-speed operation.     

Visit Toshiba at www.toshiba-components.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s