MENU

High-speed USB to digital level UART cables

New Products |
By eeNews Europe


Receive and transmit buffers with 1 kByte capacities allow efficient transfer of high levels of data. The signal levels are either +3.3 V (for the C232HD-DDHSP-0 version) or +5 V (for C232HD-EDHSP-0 version).
The integrated FT232H IC handles all the USB signalling and protocols, facilitating rapid implementation and lowering engineering overheads. Both the C232HD-DDHSP-0 and C232HD-EDHSP-0 have an optional power output capability with a maximum output current of 200 mA at their respective signal voltage level. The cables, which are 1.8m long, can cope with data transfer rates of up to 12 Mbaud.

Both of these cable products have an operational temperature range of -40 to +85°C. They are housed in black cabling with a transparent connector at the end. Individual wires are terminated on to a single header socket. An additional power output pin can be used to drive the target application. As the cables are powered by a USB host port, they can easily be configured into various interface options using freely available application software. FTDI also provides the required USB drivers free to download from its website.

Get the datasheet

Visit Future Technology Devices International at www.ftdichip.com


Share:

Linked Articles
eeNews Europe
10s