The 2W product with two LED chips connected in series achieves 140 lm for 2700 K at 95 to 111VDC. The 4 chip LED with 275 / 375 lm for 3000 / 5700 K is available for voltages of 95 to 111V in North America and Asia and 190 to 220VDC in Europe. All HiVo components are supplied in a ceramic package with dimensions of 3.5×3.5mm for the 1W and 6.0×6.0mm for the 2W and 4W.
The closer the HiVo LED’s voltage is to mains RMS voltage, the fewer the components needed in the driver solution. Because the HiVo LED’s voltage closely matches the mains RMS voltage, the need for a converter in the driver solution is completely negated. When Everlight’s new HiVo LEDs are implemented into an LED Integral Lamp the full driver solution is no longer needed.
Only a bridge rectifier, resistor, and capacitor are needed for very basic operation, resulting in higher overall efficiency of and a decrease in bill of material costs for the LED integral lamp. With saved space, more heat sinking can be added.
The extra space also allows the HiVo LEDs to be easily implemented into very small bulb applications like candelabra, mr11, or some mr16’s where traditional LEDs plus drivers would not fit.
Visit Everlight Electronics at www.everlight.com
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.