High voltage LED series for retrofit lighting applications

High voltage LED series for retrofit lighting applications

New Products |
By admin

The 2W product with two LED chips connected in series achieves 140 lm for 2700 K at 95 to 111VDC. The 4 chip LED with 275 / 375 lm for 3000 / 5700 K is available for voltages of 95 to 111V in North America and Asia and 190 to 220VDC in Europe. All HiVo components are supplied in a ceramic package with dimensions of 3.5×3.5mm for the 1W and 6.0×6.0mm for the 2W and 4W.

The closer the HiVo LED’s voltage is to mains RMS voltage, the fewer the components needed in the driver solution. Because the HiVo LED’s voltage closely matches the mains RMS voltage, the need for a converter in the driver solution is completely negated. When Everlight’s new HiVo LEDs are implemented into an LED Integral Lamp the full driver solution is no longer needed.

Only a bridge rectifier, resistor, and capacitor are needed for very basic operation, resulting in higher overall efficiency of and a decrease in bill of material costs for the LED integral lamp. With saved space, more heat sinking can be added.

The extra space also allows the HiVo LEDs to be easily implemented into very small bulb applications like candelabra, mr11, or some mr16’s where traditional LEDs plus drivers would not fit.
Visit Everlight Electronics at

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles