Highest-density 6-A power module features integrated inductor to offer thermal performance benefits
The device simplifies telecom power designs for DSPs and FPGAs by combining the inductor and passives onto one lead frame, requiring only three external components for a complete, easy-to-design 150-mm 2 solution.
The TPS84610 supports input voltages from 2.95 V to 6 V, generates a low 0.8-V output and has an adjustable switching frequency from 500 kHz to 2 MHz. The 9-mm x 11-mm x 2.8-mm low-noise module meets EN55022 Class B electromagnetic emissions, allowing it to support noise-sensitive applications, such as broadband communications equipment.
In addition to the TPS84610, TI also introduced four additional power modules with integrated inductors, including the pin-compatible 2-A TPS84210 and 4-A TPS84410, which support input voltages from 2.95 V to 6 V. The 3-A TPS84320 and 6-A TPS84621 modules support input voltages from 4.5 V to 14.5 V and output voltages down to as low as 0.6 V.
TI’s large point-of-load portfolio of voltage regulators and easy-to-use power modules ranges from SIMPLESWITCHER wide-input modules and DC/DC converters to TPS84K integrated power solutions, such as the TPS84610. All are supported by evaluation modules, reference designs and easy-to-use WEBENCH or SwitcherPro design tools.
Availability and Pricing
The TPS84610 is available in volume now from TI and its authorized distributors in a 9-mm x 1-mm x 2.8-mm QFN package. Suggested resale pricing is $6.50 in 1,000-unit quantities.
More information about the TPS84610 integrated power module at
www.ti.com/tps84k-preu
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
