/* Style Definitions */
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-bidi-font-family:”Times New Roman”;
The above board height of 2.54mm provides a low profile for tight packaging requirements. Typically mounted on the edge of the pc board, it can be mated with a board running perpendicular to it, or parallel pc boards can be daisy-chained together by using the Mill-Max 7937 horizontal SMT target pin and 0967 on opposing boards.
The 7937 provides an area approximately 2.54 mm high by 3.94mm long for the plunger of the 0967 to mate with, more than ample to ensure a highly reliable interconnect. The pin is rated at 2A continuous, 3A peak and requires 60 grams of force at 0.69mm mid-stroke. It has a lifetime of one million cycles and comes on tape & reel.
Get the datasheet at www.mill-max/PR616
Visit Mill-Max at www.mill-max.com