Imec reports smallest fully-functional HfO2-based Resistive RAM cell
Current charge storage based Flash memory technologies are believed to face scaling limitations beyond 18nm. To overcome these, a variety of innovative cell and memory concepts are investigated worldwide. One of the most promising memory concepts is the resistive RAM or RRAM. It is based on the electronic switching of a resistor element material between two stable (low/high) resistive states. The major strengths of RRAM technology are its potential density and speed.
Imec’s RRAM cell features a novel Hf/HfOx resistive element stack. It couples a cell area of less than 10x10nm² with an excellent reliability (endurance of more than 109cycles).
The cell has fast nanosecond-range on/off switching times at low-voltages. It has a large resistive window (>50) and shows no closure of the on/off window after functioning at 200°C for 30 hours. The device even remained operating failure-free functioning for 30 hours with a thermal stress of 250°C. The switching energy per bit is below 0.1pJ, and AC operating voltages are well below 3V. With these characteristics, imec’s cell meets the major requirements for device-level nonvolatile memory.
In addition, imec has also further clarified the impact of film crystallinity on the operation of RRAM cells, especially with a view on further scaling. It also sheds light on the role of the cap layer and on the switching mechanisms.
These results were obtained in cooperation with imec’s key partners in its core CMOS programs Globalfoundries, INTEL, Micron, Panasonic, Samsung, TSMC, Elpida, Hynix, Fujitsu and Sony.
Visit imec at www.imec.be
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
