Instrument examines CAN bus load
Two display modes are now available for multiplexer variables: Either all variables of a multiplexer are shown together or they are displayed separately for each multiplexer state. A software is available for download from PEAK-System’s website. It contains the new firmware 1.7.0, device help, Windows tools for the PCAN-Diag, and documentation.
The PCAN-Diag displays data traffic from a connected CAN bus in a basic manner in hexadecimal format as well as in symbolic form. It also transmits CAN messages for maintenance purposes. For a later review of the data stream, there’s a trace function for recording. At faulty communication, the diagnostics can be refined with busload measurements or, on hardware layer, with termination and voltage measurements. A more accurate picture of the waveform on the CAN lines is obtained with the dual-channel oscilloscope function.
For more information visit https://www.peak-system.com/PCAN-Diag-2.231.0.html?&L=1
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
