Integrated 1-Watt, 2-stage driver amplifiers address entire cellular frequency range
The new RF driver amplifiers integrate internal active biasing and a fast shutdown function for applications that require a power saving mode, or for applications such as wireless energy metering that transmit intermittently. The high-performance broadband RF driver amplifiers are well-suited for a variety of wired and wireless applications including cellular infrastructure; industrial, science, and medical- (ISM) band power amplifiers; defense and instrumentation equipment.
The ADL5605 and ADL5606 provide flat gain and high output third-order intercept (OIP3) specifications across their tuned frequency range. These features eliminate the need to compensate for gain loss elsewhere in the signal chain while enabling the signal strength to be increased, without compression, prior to the power amplifier stages.
The ADL5605 provides a flat gain of 23 dB, a P1dB of 31.1 dBm, an OIP3 of 44.3 dBm and a noise figure of 4.8 dB at 943 MHz. The ADL5606 provides an extremely flat gain of 23.8 dB, a P1dB of 30.7 dBm, an OIP3 of 45.7 dBm and a noise figure of 4.8 dB at 2140 MHz. Both amplifiers require few external components for tuning, making these amplifiers easy to implement in a wide variety of applications.
The new RF driver amplifiers offer low power consumption as the ADL5605 draws 312 mA and the ADL5606 draws 360 mA on a single 5-V supply.
Availability and Pricing
Samples of the ADL5605 and ADL5606 driver amplifiers are available now and will be in production in June 2011. The devices are packaged in a 4-mm × 4-mm 16-lead LFCSP and are priced at $7.75 each in 1,000 quantities.