Integrated analogue front-end simplifies sensor interfaces
The ADA4350 integrates a FET input amplifier, switching network and ADC driver into a single package, which simplifies design and lowers power and PCB footprint by more than 50% compared to discrete implementations.
The device features low-noise performance at low frequencies of 90 nV/√Hz at 10 Hz and broadband noise of 5 nV/√Hz at 100 kHz to maximise the signal-to-noise ratio of the sensor output. Wide dynamic range measurement for small, sensitive signals such as those derived from photons or electrons is enabled with the inclusion of integrated gain switching. The on-chip programmability of the ADA4350 allows designers to select external, optimised feedback components. With one chip, a single-ended or differential sensor current or voltage signal can be transformed to a high-speed, low-noise, single-ended or differential-output voltage.
In analytical measurement applications, light may need to be monitored over many decades of intensity. This requires a variety of gain switching networks that often incorporate multiple external amplifiers and analogue switches, which increases the potential for system errors. The ADA4350 integrates the switching networks and input amplifier to minimise leakage and allow the switching network to select up to six externally configurable feedback networks. In test and measurement systems, the same high measurement accuracy must be maintained across the gain levels as the user adjusts the input range of the instrument. For measuring a wider dynamic range, the ADA4350 is a suitable choice because of its high-impedance/low-Ib input amplifier and serial port-controlled switch network. The device also reduces PCB footprint while significantly increasing channel count without thermal density restrictions.
In 28-lead TSSOP, the device costs $5.73 (1000)
Analog Devices; www.analog.com/ADA4350
An evaluation board is described at; www.analog.com/EVAL-ADA4350