Integrated C-V2X solution supports China’s ITS standard
The integrated setup is based on the R&S CMW500 wideband radio communication tester and the R&S SMBV100A/B GNSS simulator by Rohde & Schwarz, together with the comprehensive simulation tool CANoe .Car2x by Vector.
The presented C-V2X test solution consists of a device under test C-V2X module AG15 provided by Quectel, running Savari’s MobiWAVE(R) V2X Software Stack and receiving the ITS messages provided by the R&S CMW500 wideband radio communication tester and the GPS signal by R&S SMBV100B vector signal generator. The R&S CMW500 uses a C-V2X software package needed to simulate the Physical- and MAC-layer in order to transmit and receive data over the PC5 radio interface.
Vector’s software environment for V2X application testing, CANoe .Car2x, is used to create and simulate detailed traffic situations for the verification of C-V2X connectivity. Savari’s C-V2X middleware helps demonstrate the versatility and performance of the R&S CMW500, while presenting a variety of applications for 3GPP LTE-V2X PC5 interoperability testing. It offers the full support of the necessary standards and specifications required for proper functioning in China’s networks, such as the GB/T 31024 standard for the next generation of cooperative intelligent transport systems.
According to the partners mentioned above, this is the only test solution available that covers all layers, from the physical layer and the RF measurements, the protocol layer and the protocol conformance tests, up to the application layer with the fully integrated ITS stack.
Rohde & Schwarz – www.rohde-schwarz.com/ad/press/v2x
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
